Check valves, they close as soon as the flow is interrupted or the flow direction is reversed.
RV Check Valves
GEA check valves are open autonomously by the pressure which is exerted by the working medium upon the valve disc. They start to open at a differential pressure of 0.01 to 0.05 bar and are fully open between 0.1 and 0.2 bar. As soon as the flow is interrupted or the flow direction is reversed, the valve closes automatically. A built-in damping device makes this type of valve especially suitable in cases where capacity requirements fluctuate. GEA check valves are designed for installation in in industrial heating and refrigeration systems. They are installed on the pressure or suction side of compressors or in pipes in which only one direction of flow is intended.
Check Valve type RV
Technical features
- Available in steel or stainless steel
- Selection of body material as per German DIN EN12284, AD2000 Series W
- Working mediums: refrigerants as per EN 378 p. 1, e. g. NH3, R22, R134a and blends with refrigerator oil; neutral, gaseous and liquid mediums; glycol-based cold brine
- Can be installed horizontally and vertically for upward flow direction
- Optionally available without damping
| RV check valves | |
| material | steel or stainless steel |
| nominal size | DN 6-150 |
| nominal pressure level | PS 25, PS 40, PS 63 |
| temperature range for standard valves | -60 °C to +150 °C |
| temperature range for HT valve series | -10 °C to +200 °C |
| connection | butt welding and flanged ends as per DIN and ANSI
brazed ends threaded ends |
Related Products
RVAK Stop Check Valves
Check Valves with a rising stem with a PTFE-ring seal on the stem
stop, with regulating cone.
RVA Stop Check Valves
Check Valves with a rising stem with a PTFE-ring seal on the stem - lockable.
RVZ Check Valves
Check valves featuring a clamp design with or without integrated damping or with integrated damping and linear spindle bearing.
Service Products
PR-OLEO® Premium-Quality Ammonia Refrigeration Oils
PR-OLEO® ammonia oils are the natural choice to optimize industrial cooling and heating applications operating with reciprocating or screw compressors.
GEA Ammonia Dryer
The GEA Ammonia Dryer removes water from the refrigerant cycle and makes the perfect addition to ammonia refrigeration systems along with filters and purgers.
GEA Service Kits for reciprocating compressors
Welcome to the world of simplicity with GEA Service Kits for reciprocating compressors. Our mission is clear - to make your experience with original spare parts seamless and your operations smoother than ever. "Take it easy, use a kit" is not just a tagline – it is a promise we deliver on.
